鑄鐵平板的連接壁圓角重要性
時間：2016/2/20 8:49:47
瀏覽量：675
鑄鐵平板壁的連接設計是否正確，對防止鑄鐵平板產生縮孔、縮松、變形、裂紋及粘砂等缺陷和提高鑄鐵平板鑄件質量都有很大的影響。設計中注意以下幾方面：
1、鑄鐵平板的壁間鏈接處都應有鑄造圓角。無圓角結構鑄鐵平板，在直角處鑄鐵積聚，熱節圓比別處大，易產生縮孔和縮松，且內側轉角處應力集中嚴重，易產生裂紋。此外，灰鐵金屬易產生柱狀晶體，在直角處晶體直交，晶體間的結合力薄弱，鑄鐵平板轉角處力學性能下降，更促進了裂紋的產生。圓角還有利于造型，避免鑄型尖角損壞而形成砂眼，使鑄鐵平板美觀。
2、為了減少熱節，避免鑄件產生縮孔、縮松等缺陷，鑄鐵平板上筋板的連接應盡量避免交叉。筋板的連接應采用環形接頭。
3、厚壁與薄壁間的鏈接要逐步過渡，設計鑄鐵平板鑄件時，當壁厚不能保證均勻時，厚壁與薄壁的連接應采用逐步過渡的方法，以避免產生應力集中和裂紋。壁厚均勻的細長鑄鐵平板和較大的鑄鐵平板鑄件等剛度較差的鑄件和壁厚不均勻的機床床身類鑄件，均易產生變形。設計這類鑄鐵時，將截面設計成對稱形狀，或加助板提高剛度結構方式，可以防止變形。
Importance of
Connecting Wall Corner of Cast Iron Plate
Whether the
connection design of cast iron plate wall is correct or not has a great
influence on preventing defects such as shrinkage, shrinkage, deformation,
crack and sand sticking in cast iron plate and improving the quality of cast
iron plate casting. The following aspects should be paid attention to in the
design:
1. Cast round
corners should be found at the wall links of cast iron slabs. Non-fillet
structure cast iron plate, cast iron accumulates at right angle, the hot spot
circle is larger than other places, easy to produce shrinkage and porosity, and
the stress concentration at the inner corner is serious, easy to produce
cracks. In addition, gray iron is prone to produce columnar crystals. The
crystals are orthogonal at right angles, the bonding force between crystals is
weak, and the mechanical properties of cast iron plate at corner are reduced,
which further promotes the crack generation. Round corners are also conducive
to the shape, avoid the damage of the sharp corners of the casting and form
sand holes, so that the cast iron plate is beautiful.
2. In order to
reduce hot spot and avoid shrinkage and porosity, the connection of ribs on
cast iron plate should avoid crossing as far as possible. Ring joints shall be
used for the connection of stiffeners.
3. The
connection between thick wall and thin wall should be transited step by step.
When the thickness of cast iron slab castings is not uniform, the connection
between thick wall and thin wall should be transited step by step to avoid
stress concentration and cracks. Slender cast iron slab with uniform wall
thickness and larger cast iron slab with poor stiffness and machine tool body
castings with uneven wall thickness are prone to deformation. When designing
this kind of cast iron, the deformation can be prevented by designing the cross
section into a symmetrical shape or by increasing the stiffness of the
reinforcement plate.
Company name: botou zhuoyuan mechanical equipment manufacturing co.,LTD
Registered
address: jiaohe development zone, botou city, hebei province
Fax
number: 0317-8031093
Contact
information: 15369812793 (WeChat with the same number) liansheng chu
Postcode:
062151
Enterprise
email:
1358827475@qq.com
Account
Opening Bank: Botou Branch of Bank of China
Account
number: 100399943203
Agricultural
bank account number: 6228481739059615270
http://zhuoyuanjixie.com