鐵地板用途,測攻機試驗平臺應用中
時間:2016/1/13 8:32:43
瀏覽量:413
鐵地板尺寸、數量及材質:外形尺寸3000×1500×130,數量為6組,每組12塊,共計72塊,材質為HT200號鑄鐵。
鐵地板鑄造幾何尺寸按圖紙要求進行,鑄件任何面不準有夾渣、縮松、裂紋、重疊、氣孔等缺陷(附鐵地板加工圖紙)。
鐵地板在加工之前要進行回火時效處理,消除內應力;此過程要派人現場監督。
機械加工幾何尺寸、公差、形狀公差表面粗糙度按圖紙要求加工。
鐵地板每12塊組成一個整體平臺,平臺整體平面度為0.4,地板與地板之間梯形槽的對稱度為0.3,梯形槽之間底面應在一個平面上誤差不大于0.3。
鐵地板地腳螺栓直徑為24mm,地下深度為300mm,灌漿孔¢70和鐵地板平面調整孔¢70及地腳螺栓孔加封蓋板。蓋板表面與鐵地板平面為同一平面,公差為:-0.1mm。
鐵地板工作表面做刮研處理,非工作面做防腐處理。


Iron floor size, quantity and material: Dimensions 3000×1500×130, the number is 6 groups, 12 pieces in each group, a total of 72 pieces, the material is HT200 cast iron.
The geometrical dimensions of iron floor castings are carried out according to the requirements of the drawings. Defects such as slag inclusions, shrinkage, cracks, overlaps, and porosity are not allowed on any surface of the castings (with iron floor processing drawings).
The iron floor shall be subjected to tempering aging treatment before processing to eliminate internal stress; this process shall be sent to the site for supervision.
Machining geometry, tolerances, shape tolerances Surface roughness is machined according to the drawings.
Each 12 pieces of iron floor constitutes a whole platform, the overall flatness of the platform is 0.4, the symmetry of the trapezoidal groove between the floor and the floor is 0.3, and the bottom surface between the trapezoidal grooves should have an error of not more than 0.3 on one plane.
The iron floor anchor bolt has a diameter of 24 mm and a depth of 300 mm. The grouting hole 70 and the iron floor plane adjusting hole 70 and the anchor bolt hole are sealed. The surface of the cover plate is in the same plane as the plane of the iron floor with a tolerance of -0.1 mm.
The working surface of the iron floor is scraped and treated, and the non-working surface is treated with anti-corrosion treatment.
Company name: botou zhuoyuan mechanical equipment manufacturing co.,LTD
Registered
address: jiaohe development zone, botou city, hebei province
Fax
number: 0317-8031093
Contact
information: 15369812793 (WeChat with the same number) liansheng chu
Postcode:
062151
Enterprise
email:1358827475@qq.com
Account
Opening Bank: Botou Branch of Bank of China
Account
number: 100399943203
Agricultural
bank account number: 6228481739059615270
http://zhuoyuanjixie.com