滄州1級優質鑄鐵平臺生產供應商

鑄鐵平臺用途：適用于各種檢驗工作，精密測量用的基準平面，用于機床機械測量基準，檢查零件的尺寸精度或形位偏差，并作精密劃線，在機械制造中也是不可缺少的基本工具。

鑄鐵平板精度：1，2，3級。

鑄鐵平臺采用HT200-300,經兩次人工時效處理。臺面進行鏟刮和加工刻度線等處理。保證了鉗工操作時的工作基本需求,下方調整支架為方鋼及優質鋼板組成。

鑄鐵平臺的制造工藝：商定有關技術條款后，進行制圖，經雙方確認后，按照?qǐng)D紙制作消失模，對模型檢驗且合格后，進行沙坑預埋。

按照所需鑄鐵平臺的材質進行澆筑。完后經過爐前爐后兩次鐵水化驗，已確認重型鑄鐵平臺材質。鑄件經打磨清砂處理后，進行一次消除鑄造內應力為目的的人工時效處理。粗加工后，在進行一次以消除加工內應力為目的的人工時效處理。然后精銑，并進行刮研。為保證其平面度準確穩定及抗磨性，平臺臺面多采用人工鏟刮處理。

鑄鐵平臺尺寸與級別對應表：(特殊規格可以按用戶要求設計生產)
A:100mm×200mm-------------400mm×400mm(本規格適用于研磨壓砂平板)精度為0級，1級，2級。
B:400mm×600mm-------------1500mm×2500mm(本規格適用于人工刮研平板)精度為1級，2級，3級。
C:1500mm×3000mm----------2000mm×3000mm(本規格適用于人工刮研平板)精度為2級，3級，精刨。
D:2000mm×4000mm----------4000mm×8000mm精度為3級和精刨。

專業生產滄州1級鑄鐵平臺，鑄鐵平板訂做咨詢：

公司名稱：泊頭市卓遠機械設備制造有限公司

                         15931713663 褚連勝

Cast iron platform use: Suitable for all kinds of inspection work, the reference plane for precision measurement, used for machine tool mechanical measurement benchmark, check the dimensional accuracy or shape deviation of parts, and make precise scribing, which is also indispensable in mechanical manufacturing. tool.
Cast iron plate accuracy: 1, 2, 3 levels.
The cast iron platform uses HT200-300 and is subjected to two artificial aging treatments. The table top is processed by scraping and processing the scale line. The basic requirements for the work of the fitter are guaranteed, and the lower adjustment bracket is composed of square steel and high quality steel.
Manufacturing process of cast iron platform: After the relevant technical terms are agreed upon, the drawing will be carried out. After confirmation by both parties, the lost mold will be made according to the drawings. After the model is tested and qualified, the sand pit will be pre-buried.
Cast according to the material of the required cast iron platform. After the completion of the hot metal test after the furnace in front of the furnace, the material of the heavy cast iron platform has been confirmed. After the casting is sanded and treated, an artificial aging treatment is performed for the purpose of eliminating the internal stress of the casting. After the roughing, an artificial aging treatment for the purpose of eliminating the internal stress is performed once. Then finish milling and scraping. In order to ensure the accuracy, stability and wear resistance of the flatness, the platform table is mostly treated by manual scraping.
Cast iron platform size and level correspondence table: (Special specifications can be designed and produced according to user requirements)
A: 100mm × 200mm ------------- 400mm × 400mm (this specification is applicable to the grinding sand plate) The accuracy is 0, 1 and 2.
B: 400mm × 600mm - ------ 1500mm × 2500mm (this specification is suitable for manual scraping of flat plate) accuracy is 1 level, 2 levels, 3 levels.
C: 1500mm × 3000mm----------2000mm × 3000mm (this specification is suitable for manual scraping of flat plate) The accuracy is 2, 3, fine planing.
D: 2000mm × 4000mm --------- 4000mm × 8000mm precision is 3 and fine planing.