大型鑄鐵平板生產訂做

大型鑄鐵平板生產訂做鑄鐵平臺訂購咨詢：

公司名稱：泊頭市卓遠機械設備制造有限公司
注冊地址：河北省泊頭市交河開發區
傳真號碼：0317-8031093
聯系方式：(河北)15369812793 褚連勝

大型鑄鐵平板（鑄鐵平臺）精度0-3級的工作面應采用刮削工藝，刨削工作表面的表面粗糙度按輪廓算術平均偏差Ra值應不大于5um。
大型鑄鐵平板（鑄鐵平臺）平面度：可分實驗室級、校驗級、工具室級、三級。
大型鑄鐵平臺用途：適用于各種檢驗工作，精密測量用的基準平面，用于機床機械測量基準，檢查零件的尺寸精度或形位偏差，并作精密劃線。在機械制造中也是不可缺少的基本工具。
鑄鐵平板材質: 材料為高強度鑄鐵HT200-250工作面硬度為HB160—210。經過兩次處理（人工退火600?----700?和自然時效2---3 年，使該產品的精度穩定，耐磨性能好。
大型平臺精度：按國家標準計量檢定規程執行，分別為0，1，2，3級四個級別。
大型鑄鐵平板/平臺的表面質量：用涂色法檢驗。
0級1級平板平臺在每邊為25㎜平方的范圍內不少于25點。
2級平板平臺在每邊為25㎜平方的范圍內不少于20點。
3級平板平臺在每邊為25㎜平方的范圍內不少于12點。
機床工作臺|落地鏜床工作臺均為大型鑄鐵平板類產品。

The working surface of the large cast iron plate (cast iron platform) with a precision of 0-3 should be scraped. The surface roughness of the planing surface should be no more than 5um according to the arithmetic mean deviation of the contour.
Large cast iron plate (cast iron platform) flatness: can be divided into laboratory level, calibration level, tool room level, and third level.
Large cast iron platform use: Suitable for all kinds of inspection work, the reference plane for precision measurement, used for machine tool mechanical measurement benchmark, check the dimensional accuracy or shape deviation of parts, and make precise scribing. It is also an indispensable basic tool in machine building.
Cast iron plate material: The material is high-strength cast iron HT200-250 working face hardness is HB160-210. After two treatments (artificial annealing 600?----700? and natural aging 2---3 years, the precision of the product is stable and the wear resistance is good.
Large platform accuracy: according to the national standard metrological verification procedures, respectively, the four levels of 0, 1, 2, 3.
Surface quality of large cast iron plates/platforms: inspection by coloring method.
The 0-level 1 level flat platform is not less than 25 points in the range of 25 mm square on each side.
The level 2 flat platform is not less than 20 points in the range of 25 mm square on each side.
The level 3 flat platform is not less than 12 points in the range of 25 mm square on each side.
The machine tool table|floor boring machine table is a large cast iron plate product.